Skip to main content
UPS Manager
MonitoringSourceAPIChangelog

Changelog

1.0.1​

Added​

  • Live NUT currents, real power and, when turned on, calculated DC power
  • Battery and driver details, and a searchable list of every NUT value
  • Output energy used, in Wh and kWh, with charts for 24 hours, 7 days and 30 days
  • UPS load estimated from output watts and the UPS's real power rating when the device doesn't report it
  • Overview refresh from 1 to 30 seconds

Changed​

  • Runs in its own process on Termix 26.11.2 and later, with no access to the server beyond what Termix allows it
  • Its process stops when it has nothing to watch or run, and Termix starts it again when there is work, which saves memory on Termix 26.11.2 and later

Fixed​

  • Source editor Test button now matches the Save button size

1.0.0​

Added​

  • A UPS tab for each host that reads UPS devices through NUT, apcupsd or an SNMP card
  • Battery charge, runtime, load, input and output voltage, temperature and last self test
  • Charts for the last 24 hours, 7 days and 30 days
  • A power event log for every UPS
  • Alerts when power is lost, the battery is low or needs replacing, the UPS is overloaded, a self test fails or the UPS stops answering
  • Start a battery self test, mute the beeper and send other NUT commands, with a check before anything that can cut power
  • UPS devices show in the All hosts table, and power status, charge and runtime show as status tiles
  • A dashboard card with every UPS on your hosts, worst first

Changed​

  • Needs Termix 26.11.1 or newer